Akura AHH20LCD 사용자 설명서 - 페이지 16

{카테고리_이름} Akura AHH20LCD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Akura AHH20LCD 19 페이지. 20” lcd tv / monitor

5. SEARCH

Use the P- /P+ buttons to select the item .

PROGRAM NO.：Press [V+]/[V-] to directly switch present

program No., or press [-/--] and [0]~[9] to enter relevant program No.

·COLOR SYSTEM：Color system setup. Press [V+]/[V-],

system changes as follows:

AUTO → PAL → NTSC → NTSC4→ SECAM → AUTO

·SOUND SYSTEM：Sound system setup. Press [V+]/[V-],

system changes as follows: "I" → "DK" → "BG" → "I"

· SKIP： When selected "On" this programme is Skipped when using the P+ / P- buttons. The programme is

still available using the "numeric" buttons. To turn "Skip" off, srelect and use the V- button.

· AUTO SEARCH：Press [V+] to start auto search. The Tv will search all bands and store the received

programmes in order . To stop searching press the V- or Menu buttons.

· SEARCH：Press [V+] to start manual search backward. And press [V-] to search forward. The first program

will be the present program (given a program number); press [MENU] in the searching process to stop

searching. If there is no programme found, then it will stop at blue back.

· FINE TUNE：Press [V-]/[V+] for fine tuning.

6. EXCHANGE

· EXCHANGE：Press [V-]/[V+] to enter EXCHANGE:

PROGRAM is the present No., and press [V+]/[V-] to switch,

or press [-/--] and [0]~[9] to find the relevant program.

Next PROGRAM is the exchange no., which could be

achieved through [V+]/[V-] or [-/--] and [0]~[9] to

find the relevant program. Press [V+]/[V-] in EXCHANGE

to confirm exchange, or quit by pressing [MENU].

Menu Operation in VGA/YPBPR State.

1. When system signal source is switched to VGA, there will be a PC mark in the top-left corner of the

screen .

2. In VGA mode, if there is no signal, or the signal exceeds the

supported range, there will be a mark of no

signal displayed.

3．In VGA mode, The main menu is as in the picture.