Akura MSD306 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Akura MSD306에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Akura MSD306 2 페이지. Msd306
Akura MSD306에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (3 페이지), 빠른 시작 매뉴얼 (3 페이지)

페이지 인쇄

WATCHING TV (basic operation)

12.

Adjust the volume to the desired level using the volume button on the TV or Remote control. The sound can be

silenced by pressing the MUTE button on the remote control and a mute symbol will appear on the screen. Press the

MUTE button a second time to restore the sound.

13.

To switch off the TV for short periods, press the POWER button. The TV will go into standby mode and the LED

indicator will change to red. If not using the TV for extended periods turn off at the mains switch to conserve

electricity, all settings will be retained.

Although the Flat screen is made with high precision technology and 99.9% or more of the pixels are effective, dots may

appear. These can be black or bright dots (red, green or blue) and may appear constantly on the Flat screen. This is a

structural property of the Flat panel and is not a malfunction.

Place the TV face

down on a suitable

surface with the base

mounting facing

towards you (Fig 10).

Place the base plate onto the TV. Press the base until the "Tabs" click into place

Fit the two screws (3mm x 8mm) provided into the holes as shown in Fig 11. Tighten using

a No 0 Posi screwdriver.

If wall mounting the TV see page 24 in the Main Instruction book.

Flat Screen

Base fitting and removal.

Fig 11

Fig 10