Air Cleaning Equipment Horizon Titan XG90 설치 및 운영 매뉴얼 - 페이지 11

{카테고리_이름} Air Cleaning Equipment Horizon Titan XG90에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Air Cleaning Equipment Horizon Titan XG90 13 페이지.

Be sure to secure the ducting with tie wrap. Also, keep in mind, that the supply ducting can be screwed

into an adapter if necessary.

Ducting Installation

••

Maximum total length of duct run= 10'

•

• Maximum length if only ducting inlet or outlet= 6'

•

• To connect 12" return ducting, it may be helpful to:

•

1. Remove inlet grille from end cap

•

2. Connect duct to inlet grille

•

3. Reconnect inlet grille to end cap

•

Note: The supply duct adapter is standard on all units.

Removing Duct Adapter

If it is necessary to remove the

adapter, place hand at bottom of

adapter and use your ﬁngers to press

up on base of adapter. Next, lift hooks

out of cover holes, and remove

adapter from machine.

Flex Duct Installation

Rotate the ﬂex duct counter-

clockwise or simply position

over adapter and secure with

wire tie.

•

Installing Duct Adapter

To install adapter, line up with

holes on the side of unit and

push up from base of adapter.

Flex Duct Removal

Rotate ﬂex duct clockwise or

remove wire tie and slide duct

oﬀ adapter.