Air Cleaning Equipment Horizon Titan XG90 설치 및 운영 매뉴얼 - 페이지 7

{카테고리_이름} Air Cleaning Equipment Horizon Titan XG90에 대한 설치 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Air Cleaning Equipment Horizon Titan XG90 13 페이지.

4. Sensor Location Button

•

• Press this button to switch the dehumidiﬁer between "unit" and "remote" mode. (See

Horizon Remote Instructions for further details).

•

• This button is only active when a Horizon Remote has been connected to unit.

NOTE: The humidity levels displayed are approximate only. (+/-5%).

1. Humidity Display Screen

••

The display screen has two functions:

•1. When the unit is powered on, it shows the indoor humidity.

•2. While setting the desired humidity level, the screen will show the

ity. After a brief delay, the display will revert to indoor humidity level.

2. Power Indicator Light

••

This light indicates that the unit is properly powered on and ready to operate. Always

make sure this unit is "oﬀ" prior to performing any service.

3. Continuous Mode/AutoDefrost Light

••

When this light illuminates green, it indicates that the dehumidiﬁer is set to continuous

operation mode.

••When the light glows red, it means the unit is in auto defrost mode and clearing the

evaporator coil of any ice buildup.

4. Compressor Light

••

When the compressor light glows red, it indicates the compressor has been initiated

but is currently warming up.

•• Once the compressor light switches to green, it indicates the compressor is in working

status.

5. Unit Indicator Light

•

When the unit indicator light is red, it illustrates the dehumidiﬁer is in unit mode.

Indicator Lights

set humid-