Canon PIXMA MX700 Series 서비스 매뉴얼 - 페이지 26

{카테고리_이름} Canon PIXMA MX700 Series에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX700 Series 44 페이지. Office all-in-one printer
Canon PIXMA MX700 Series에 대해서도 마찬가지입니다: 청소 매뉴얼 (7 페이지), 네트워크 설정 매뉴얼 (32 페이지), 보충 설명서 (6 페이지), 설정 지침 (2 페이지), 브로셔 및 사양 (2 페이지), 기술 정보 (2 페이지)

페이지 인쇄
Canon PIXMA MX700 Series 서비스 매뉴얼
MX700

3-3. Adjustment / Settings

(1) Paper feed motor adjustment

1) When attaching the motor, fasten the screws so that the belt is properly stretched (in the direction indicated by the blue arrow in
the photo below).
2) After replacement, be sure to perform the service test print, and confirm that no strange noise or faulty print operation (due to
dislocation of the belt or gear, or out-of-phase motor, etc.) occurs.
The screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.
DO NOT loosen them in other cases.

(2) Carriage rail adjustment

Perform the following adjustments when attaching the carriage rail:
1) Before loosening the screws, mark the following positions on the rail:
Left side: Mark the boss position.
2) In attaching the carriage rail, make sure that the left boss and right hole fit to the marks made in step 1) respectively, then fasten
the screws.
3) Be sure to perform the confirmation test detailed below; confirm that the print quality is proper and the print head is not contacting
the paper.
Right side: Mark the hole position.
24 / 41
TABLE OF CONTENTS