Canon PIXMA MX922 설정 매뉴얼 - 페이지 4
{카테고리_이름} Canon PIXMA MX922에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon PIXMA MX922 31 페이지. Getting your multifunction
back on your network
after a router or network change
Canon PIXMA MX922에 대해서도 마찬가지입니다: 간편한 설정 (2 페이지), 네트워크 설정 매뉴얼 (21 페이지), 설정 (29 페이지), 연결 설정 (15 페이지), 빠른 매뉴얼 (22 페이지), 매뉴얼 (20 페이지)
페이지 인쇄
2. Use the
3. Press the OK button (B).
The (blue) Wi-Fi lamp (C) lights up when wireless connection is enabled.
c Setup Procedure Selection
The printer will automatically search for access points supporting WPS.
* If the Push Button Method screen is displayed on the printer
When you are unsure if your access point or router supports this technology, press the Stop button.
Proceed to the screen for Standard setup.
Push Button Method →
buttons (A) to select the WLAN setup icon.
Select the most suitable connection method from the following.
d-A
•
Standard setup →
Connect to Access Point by entering the Network Password
•
WPS →
d-C
Connect to WPS-compatible Access Point
Other setup (Advanced setup) →
•
Connecting to the Network by Entering the Access Point's Settings
Directly on the Printer
When using WEP key number 2, 3 or 4, select "Advanced setup".
d-B
d-D