Canon A-1 빠른 매뉴얼 - 페이지 11

{카테고리_이름} Canon A-1에 대한 빠른 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon A-1 14 페이지. Staple finisher and finisher additional tray
Canon A-1에 대해서도 마찬가지입니다: 서비스 매뉴얼 요약 (28 페이지)

페이지 인쇄

The Canon XH A1 HD camcorder

Quick Guide

Switches above the XLR inputs allow switching between Line and Mic - switch to

Mic if using a mic

Ch1, if you are only recording on one channel only

Ch1 Ch2, if you are using 1 mic and you want to record in stereo - it will put same

audio on both channels

Mic attenuator – switch this on if you are in a really loud situation and levels are

peaking, it will reduce audio levels by 20 db

To use XLR connected mic, you have to turn on the XLR input on the camcorder:

menu > audio setup > XLR input > on

Display indicates XLR is on

You must turn it off again when you switch back to onboard mic

__________________

Mics and Phantom Power:

2 types of mics:

Condenser - require power such as a battery or from the camcorder

If they don't have a battery, they need to draw power from the connection called

phantom power), e.g. from the camcorder

Dynamic mics - don't require power, don't need batteries

Turn on the Phantom Power if needed:

in front of XLR jacks, 1 switch for each jack

plug mic in first, then turn on phantom power

when finished, turn off phantom power first, and then unplug the mic

Lavalier mics

Wireless mic, picks up good sound from your subject

Mostly for interviews

Operates on radio frequencies. Attach the transmitter and the mic to the subject

Shoe mountable - mount receiver on shoe on top of camera, or attach to camera

operator's belt

XLR or mini cable out from the receiver into the camcorder, Ch1 if you're only

using one mic

Set up the transmitter, which is the mic itself

The person speaking should run the mic and cable under their shirt and clip the

mic to the front of their shirt

Hide the transmitter behind the subject

Turn on XLR input if you are using and XLR cable

Set your levels and start shooting