Astrel Instruments AST-8300-A 자동 매뉴얼 - 페이지 14

{카테고리_이름} Astrel Instruments AST-8300-A에 대한 자동 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astrel Instruments AST-8300-A 14 페이지.
Astrel Instruments AST-8300-A에 대해서도 마찬가지입니다: 시작하기 (20 페이지), 사용자 설명서 (6 페이지)

페이지 인쇄

Astrel Instruments

AST-8300-A

1. Everything on the photographic setup should be tightened: focusers, camera mounts,

mounting of the optical tubes to each other and to the telescope mount, mounting of the

mount head to the tripod/column, etc. The camera wires shouldn't dangle. The floppy

cable parts should be as short as possible.

2. It is recommened to induce small imbalance along RA in the direction opposite to the

diurnal rotation.

3. If the guiding star is too bright, It is recommended to adjust camera (if the hardware

allows) to eliminate overluminance.

4. The change in camera parameters (Gain, FPS, etc.) requires the obligatory recalibration

of the camera with the dark frame, if it is used.

5. It is recommended to use the two-axes calibration method in the near-polar regions,

where the drift along RA is very short during the calibration.

AUTHOR

Andrew Stepanenko (Galaxy Master) <[email protected]>

AST8300 CCD camera version porting: Andrea Ricciardi <[email protected]>

PROJECT PAGE

http://sourceforge.net/projects/linguider/

SUPPORT

<[email protected]>

Autoguider Manual

14/14

rev A