Canon imageFORMULA 사용자 설명서 - 페이지 12

{카테고리_이름} Canon imageFORMULA에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon imageFORMULA 31 페이지. Flatbed scanner unit

페이지 인쇄

Moving the Flatbed

● If you move the flatbed, make sure to first set the lock switch on the

underside of the flatbed to the

into place. Make sure to carry the flatbed it with both hands so as

not to drop it. The flatbed weighs approximately 7.7 lb. (3.5 kg).

● Before you use the flatbed, make sure to set the lock switch on the

underside of the flatbed to the

unit.

● Make sure to disconnect the interface cable and AC adapter before

you move the flatbed. If the flatbed is transported with these items

connected, the plugs and connectors may be damaged, or cause

the flatbed to fall and result in personal injury or damage to the

flatbed.

Handling

WARNING

■ Never use alcohol, benzene, paint thinner, aerosol sprays, or any

other flammable substance near the flatbed.

■ Do not cut, damage, or modify the power cord. Do not place heavy

objects on the power cord, and do not pull or excessively bend the

power cord.

■ Never connect the power cord when your hands are wet.

■ Do not connect the flatbed to a multiplug power strip.

■ Do not knot or coil the power cord, as this may result in a fire or

electric shock. When connecting the power cord, make sure that the

power plug is securely and completely inserted into the power

outlet.

■ Do not use a power cord or AC adapter other than the ones

provided with this flatbed.

■ Do not take the flatbed apart or modify it.

position to lock the scanning unit

Lock Switch

position to release the scanning

■ Never disassemble or modify the AC adapter, as this is dangerous.

■ When cleaning the flatbed, turn the power switch OFF and

disconnect the power cord from the power supply.

■ Clean the flatbed using a slightly dampened cloth that has been well

wrung out. Never use alcohol, benzene, paint thinner, or any other

flammable substances.

■ Disconnect the power cord from the power outlet regularly, and

clean the area around the base of the power plug's metal pins and

the power outlet with a dry cloth to ensure that all dust and grime is

removed. If the power cord is connected for a long period of time in

a damp, dusty, or smoky location, dust can build up around the

power plug and become damp. This may cause a short circuit and

result in a fire.

■ If the flatbed makes strange noises, or gives off smoke, heat or

strange odors, or the flatbed does not function or other

abnormalities occur when you use the flatbed, immediately turn the

power switch OFF and disconnect the power plug from the power

outlet. Then, contact your local authorized Canon dealer or service

representative for further information.

■ Do not drop the flatbed, or subject it to impact or strong shock.

Should the flatbed ever become damaged, immediately turn the

power switch OFF, and disconnect the power plug from the power

outlet. Then, contact your local authorized Canon dealer or service

representative to have the unit serviced.

■ Before moving the flatbed, be sure to turn the power switch OFF,

and disconnect the power plug from the power outlet.

CAUTION

■ Do not install the flatbed on a surface that is unstable, tilted, or

subject to excessive vibrations. Doing so may cause the flatbed to

fall, resulting in personal injury or damage to the flatbed.

■ Never place small metal objects, such as staples, paper clips, or

jewelry on the flatbed. These items may fall into the flatbed, and

cause a fire or electric shock. If such objects ever fall inside the

flatbed, immediately turn the power switch OFF, and disconnect the

power plug from the power outlet. Then, contact your local

authorized Canon dealer or service representative to have the unit

serviced.

■ Do not install the flatbed in a humid or dusty location. Doing so may

cause a fire or electric shock.

■ Do not place objects on top of the flatbed, as these objects may tip

or fall over, resulting in personal injury.