Canon L1 설치 절차 매뉴얼 - 페이지 17

{카테고리_이름} Canon L1에 대한 설치 절차 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon L1 48 페이지.
Canon L1에 대해서도 마찬가지입니다: 사용 설명서 (37 페이지)

2.3

Connecting to the Host

Machine

6) Fix the fixing plate (rear) of the host machine in

place to the finisher using a stepped screw [ l ] (M4).

<Finisher-AE 1 >

1) If you removed the auxiliary caster, attach the left

rear foot cover, adjust the auxiliary rail to suit needs

of the user, and mount it in place using four screws.

2) Separate the host machine from the finisher.

3) Mount the ground rail [I] to the finisher using two

screws [2] (binding; M4

6).

4) Attach the included rubber sheet [I] to the Buffer

Pass Unit-E2 along the line of reference [2].

5) Mount the face plate [I] (included with the Buffer

Pass Unit-E2) using a screw (binding; M4 x 6) [2]

that comes with the Buffer Pass Unit-E2.

7) Fix the fixing plate [l] (front) of the host machine

in place to the finisher [3] using a stepped screw [2]

(M4). (The figure shows a Saddle Finisher-AE2.)

8) Mount the front cover using three screws.

9) Mount the rear upper cover (small) to the finisher

using a screw.