Astro-Gadget EQStarProEQ5 사용자 설명서 - 페이지 16
{카테고리_이름} Astro-Gadget EQStarProEQ5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Astro-Gadget EQStarProEQ5 19 페이지.
페이지 인쇄
EQStarProEQ5 User Guide
7. EQStarPro control via ZWO ASIAir Pro
The ZWO ASIAir Pro astronomic controller is a popular control box for scripted automated
astrophotography, for use principally with ZWO imagers. (see
camera.com/product/asiair-pro
EQStarPro can be controlled via an ASIAir Pro controller via USB or WiFi.
7.1. ASIAir Pro control via USB
USB is likely simpler: just use the supplied USB cable connected to the PC port on the EQStarPro and
to a USB port on the ASIAir.
In the telescope settings form of the ASIAir Pro, choose 'EQMOD with SkySafari' with a 9600 baud
serial connection:
7.2. ASIAir Pro control via WiFi
For WiFi connections, the EQStarPro must be started with WiFi turned on. Slide the Wifi slider
switch on the EQStarPro to the right. If the EQStarPro is powered via the ASIAir Pro, turn both on at
the same time. The EQStarPro should beep 3 times and the WiFi indicator LED should be lit.
Connect the ASI Air to your home network or the ASIAir Pro network. Once this is complete, launch
the ASIAir app, turn on station mode and connect to the EQStarPro network.
Finally, set the ASIAir Pro telescope settings to use 'EQMOD for SkySafari' with an IP address of
192.168.4.1 and port of 11880:
)
16
www.astro-gadget.com
https://astronomy-imaging-