Ametek Land NIR-2K 설치 매뉴얼 - 페이지 15
{카테고리_이름} Ametek Land NIR-2K에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ametek Land NIR-2K 20 페이지.
페이지 인쇄NIR-656 / NIR-2K
4.1 Connecting the mains input to the TRACO Power Supply Unit
Fig. 4-1
Fig. 4-2
Fig. 4-3
Fig. 4-4
Installation Guide
The TRACO Power Supply Unit is supplied with
a 3-pin AC input connector (Fig. 4-1). You will
need to disassemble this connector to install the
cable.
1)
Unscrew the cover from the mains Input
on the Power Supply Unit.
2)
The easiest way to disassemble the 3-pin
AC input connector is to first screw the
connector assembly onto the input socket
(Fig. 4-2).
3)
Grip the rear section of the input connector
and unscrew it from the Power Supply Unit
(Fig. 4-3).
The connection terminals inside the input
connector will now be revealed (Fig. 4-4).
4)
Unscrew the connector front section from
the Power Supply Unit and disassemble
the remaining parts of the connector.
5)
Slide the rear locking ring, gasket and
shell body over the mains input cable.
Thermal Imaging Camera
11