Astrolite WARRIOR 360 사용자 설명서 - 페이지 9

{카테고리_이름} Astrolite WARRIOR 360에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Astrolite WARRIOR 360 13 페이지.

Press Program save the chase and exit the programming mode.

B: Create the scenes first and then add the scenes into the chase.

Step

Create scenes (See "Create a Scene").

Press Program to enter programming mode

Select one of Chase1 and Chase2 to store the chase.

Select a number from 1--18 as the number of the chase. If the LED indicator of the number button

is on, it means there is an existing chase in it.

Select one of SC1, SC2 and SC3 by the order of the scenes' saving time.

If the LED indicator of the number button is on, it means there is an existing scene in the number.

Select a scene that you want to add into the chase. At this time the selected scene is running as

preview, but it has not yet been added. The default speed is 3 seconds, which can be changed by the

function wheel if E/XY is off.

After selecting a scene, press ADD to add the scene into the chase. It will automatically jump to the

next step. Repeat Step 5---7 to add a new scene.

Press DEL to delete a scene in the chase; Press Insert to insert a step of scene; Press <=/SETX or

=>/SETY to edit the previous or next scene in the chase. When the next scene is blank, it will not

move further.

Anytime press exit for some seconds to exit the programming mode.

Press Program to save and exit.

C: Create a chase by mixing Method A & B

Step

Create scenes (See "Create a Scene").

Press Program to enter programming mode

Select one of Chase1 and Chase2 to store the chase.

Select a number from 1--18 as the number of the chase. If the LED indicator of the number

button is on, it means there is an existing chase in it.

Now, the lighting effect can be selected in the scenes or created by adjusting the sliders.

To select from the scenes, press one of SC1, SC2 and SC3, and then select the desired scene

to add into the chase.

To create the effect by adjusting the sliders, select the desired fixture and push the sliders to

adjust the effect.

You can also edit the selected scene, too.

After making the effect, press ADD to add it into the chase. It will automatically jump to the

next step. Repeat Step 5---6 to add a new scene into the chase.

Press DEL to delete a scene in the chase; Press Insert to insert a step of scene; Press

<=/SETX or =>/SETY to edit the previous or next scene in the chase. When the next scene

is blank, it will not move further.

Anytime press exit for some seconds to exit the programming mode.

Press Program to save and exit.

Description