Astronergy CHSM60M-HC 설치 매뉴얼 - 페이지 9

{카테고리_이름} Astronergy CHSM60M-HC에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Astronergy CHSM60M-HC 12 페이지. Crystalline silicon pv
Astronergy CHSM60M-HC에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (18 페이지), 설치 매뉴얼 (19 페이지), 매뉴얼 (19 페이지)

페이지 인쇄

Especially for Figure e ,f and g mounting method, the modules may be mounted using

clamps designed for solar modules refer to Figure j, the modules must be supported along

the length of the edge, and should overlap the array rail by 10mm – 14mm

Electrical Installation

4.1 Installation Condition

4.1.1 The electrical characteristics are within ±10% of the indicated values of Isc. Voc and

Pmpp under the standard test conditions (irradiance of 1000 W/m

temperature of 25℃.

4.1.2 The IEC & UL standard maximum system voltage for the regular module series is 1000V,

the 1500V standard products are also available according to the requirements. The IEC &

UL standard maximum system voltage for half-cell module series is 1500V (except for

black modules).

4.1.3 Connect quantity of modules that match the voltage specifications of the inverters used in

system. Modules must not be connected together to create a voltage higher than the

permitted maximum system voltage under the lowest local temperature conditions.

4.1.4 Under normal conditions, a photovoltaic module is likely to experience conditions that

produce more current and/or voltage than reported at standard test conditions.

Accordingly, the value of I

when determining component conductor ampacities, fuse sizes, and size of controls

Chint Solar (Zhejiang) Co.,Ltd. | Add:1335 Bin´an Road, Binjiang District, Hangzhou | P.C: 310053

Tel: 0086-571-5603 1888 | Fax: 086-571-5603 2316 | Website: http://energy.chint.com/

Figure h

marked on this module should be multiplied by a factor of 1.25

Figure i

Figure j

, AM1.5 spectrum, cell