Canon EOS 5D Mark II 사용 설명서 - 페이지 5
{카테고리_이름} Canon EOS 5D Mark II에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon EOS 5D Mark II 19 페이지. Firmware ver. 1.1. new feature
Canon EOS 5D Mark II에 대해서도 마찬가지입니다: 포켓 매뉴얼 (2 페이지), 포켓 매뉴얼 (2 페이지), 제품 설명서 (39 페이지), 제품 설명서 (36 페이지), 사양 (2 페이지), 브로셔 (24 페이지), 소책자 (2 페이지), 펌웨어 업데이트 절차 (6 페이지)
페이지 인쇄
Preparing Sample Images
PSE uses a sample image to perform the various adjustments and save
the adjusted results as an original Picture Style file. For this reason, a
sample image
(p.2)
to be used for this purpose needs to be prepared in
advance and saved on your computer.
The settings performed in PSE are saved as a Picture Style file
which is separate from the sample image, and the sample image used
to perform the adjustments itself is not affected at all.
Starting up PSE
Double-click the [Picture Style Editor] icon on the
desktop.
The main window
(Description on the right)
starts up.
You can also start up PSE from the camera software "EOS Utility".
Refer to the "Function for Use with the Accessories" of "Reference"
in "EOS Utility Instruction Manual" (PDF electronic manual) for
details.
Opening a Sample Image
Open a sample image and perform various adjustments with that image
as a basis.
Drag and drop a sample image to the main window.
(p.15)
appears when PSE
The sample image is displayed in the main window with the
camera settings at the time of shooting.
The [Tool palette] appears.
If you adjust a RAW image in Digital Photo Professional
(hereinafter, "DPP") and then open it as a sample image with
PSE, the adjustments made in DPP will not appear in the image.
If you open a RAW image, which has had the Auto Lighting
Optimizer settings set in the camera or DPP, as a sample image
with PSE, the Auto Lighting Optimizer settings set in the camera
or DPP will not appear in the image.
Introduction
Contents
Preparing
a Sample
Windows
Pre-adjustments
Characteristics
Drag and drop
Saving
Preferences
Reference
Basic
Image
4