Canon iR Series 사용자 설명서 - 페이지 26
{카테고리_이름} Canon iR Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Canon iR Series 46 페이지. Network scangear
페이지 인쇄
2
Select the scanner to be used by either of the following methods.
- Click the Discover button to search for scanners on the network and display the results in
the list of scanners. Click the scanner to be used in the list, then click the Select button.
- Click the IP Address button to display the IP Address dialog box. Enter the scanner IP
address in the boxes, then click the OK button.
When you select the scanner, the information of the selected scanner appears under
Selected Scanner.
IMPORTANT
•
When you search for scanners on the network, only scanners in the same subnet (network
with the same network ID) as the computer in which Network ScanGear is installed appear in
the list. When you specify a scanner IP address, it is possible to specify an IP address outside
the subnet.
NOTE
•
After selecting the scanner, you can click the Test button to check that the selected scanner
can be used.
3
Click the Exit button.
The ScanGear Tool closes.
Selecting the Network Scanner to be Used
3
3-9