Asus AAEON BOXER-8250AI 사용자 설명서 - 페이지 33

{카테고리_이름} Asus AAEON BOXER-8250AI에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus AAEON BOXER-8250AI 34 페이지. Compact fanless embedded ai@edge box pc with nvidia jetson xavier nx

페이지 인쇄

3.2

Connecting to PC/Force Recovery Mode

On Host Computer, open Linux terminal and enter the following command to extract

compressed OS image files (file name may vary):

$ tar -zxvf ACLinux_4.9_ACLNX49D.NV05.BOXER-8250AI.2.tar.gz

Next, perform the following steps to force the system to start in USB Recovery Mode:

Connect the Micro-USB plug on the USB cable to the Recovery Port on the

BOXER-8250AI and the other end to an available USB port on the host PC.

Connect the BOXER-8250AI power supply.

Press and hold the recovery key button. While holding the recovery key button,

power on the system, and continue to hold the recovery key button for two

seconds, then release. The BOXER-8250AI should enter recovery mode.

When device is in recovery mode, lsusb command on host PC will list a line of

"0955:7e19 Nvidia Corp"

Recovery mode can also be initiated with the system disassembled. Ensure the NVIDIA

Jetson Xavier NX module is installed and refer to the image below to perform the steps:

Chapter 3 – OS Flash guide