Dafra DNPB328 운영 매뉴얼 - 페이지 6

{카테고리_이름} Dafra DNPB328에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dafra DNPB328 10 페이지. Rivnut tool
Dafra DNPB328에 대해서도 마찬가지입니다: 운영 매뉴얼 (10 페이지)

DNPB328 Operation Manual

TOOL MAINTAINANCE

In order to maintain optimum performance after several weeks of regular use, add a few drops

of hydraulic oil to the inlet of the air adaptor (#58) of the tool in order to reduce the friction of the

tool parts since the oil will be blown inside the tool when tool is in operation.

After a period of use, the tool stroke may be reduced which indicated that the hydraulic oil in the

pneumatic tool needs to be refilled or changed;

1) Remove the screw (#17) with a hexagon wrench:

2) Connect the air supply and to place a cloth over the hole where the screw (#17) was

removed, then to pull the trigger (#53) and the oil will be forced out from the tool

3) Screw the oil inject adaptor (in oil injector set in the accessories pack) into the hole where

screw (#17) was removed;

4) Use the oil injector (in the accessories pack) to slowly inject the oil until full (approx. 15ml).

Remove the injector and its adaptor, then clean off any excess oil on the tool and tightly

screw the screw (#17) back into the tool;