Asus 4716659666448 사용자 설명서 - 페이지 21

{카테고리_이름} Asus 4716659666448에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus 4716659666448 28 페이지.

페이지 인쇄

Main Source

PBP Source

Resolution A

640x350-70Hz

720x400-70Hz

Resolution A

3840x2160-30Hz

640x350-70Hz

3840x2160-60Hz

720x400-70Hz

3840x2160-30Hz

3840x2160-60Hz

3840x2160-30Hz

3840x2160-60Hz

3840x2160-30Hz

3840x2160-60Hz

• To get better view experience, to keep DisplayPort as main source is

recommended.

• Resolution A refers to the resolution which is equal or less than

1920x1080 and V frequency is equal or less than 60Hz.

ASUS LCD Monitor PB287 Series

PBP mode main/sub source setting

Support

Resolution A

640x350-70Hz

YES

720x400-70Hz

Resolution A

640x350-70Hz

720x400-70Hz

No signal

Operating Instruction

If main source (left window) is HDMI-1, sub

source is DisplayPort( right window):

1. Activating the OSD, turn off the PBP function

2. Select the input source to DisplayPort

3. Change the PC DisplayPort resolution to

1920x1080-60Hz

4. Activating the OSD,turn on the PBP function,

and select the main/sub source you wanted.

If main source(left window) is DisplayPort, sub

source is HDMI-1(right window):

1. Activating the OSD, select the main source

to HDMI-1

2. turn off the PBP function

3. Select the input source to DisplayPort

4. Change the PC DisplayPort resolution to

1920x1080-60Hz

5. Activating the OSD, turn on the PBP function,

and select the main/sub source you wanted.

If main source(left window) is DisplayPort, sub

source is HDMI-1(right window):

1. Activating the PIP/PBP Setting shortcut OSD,

turn off the PBP function

2. Change the PC DisplayPort resolution to

1920x1080-60Hz

3. Activating the OSD, select the main source

to HDMI-1

4. Change the PC HDMI-1 resolution to

1920x1080-60Hz

5. Activating the OSD, turn on the PBP function,

and select the main/sub source you wanted.

If main source (left window) is DisplayPort, sub

source is HDMI-1 or HDMI-2 (right window):

1. Activating the OSD, select the main source to

HDMI-1 or HDMI-2

2. Activating the PIP/PBP Setting shortcut OSD,

turn off the PBP function

3. Select the input source to DisplayPort

4. Change the PC DisplayPort resolution to

1920x1080-60Hz

5. Activating the OSD, turn on the PBP function,

and select the main/sub source you wanted.

3-7