Asus C1241Q 사용자 설명서 - 페이지 28

{카테고리_이름} Asus C1241Q에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus C1241Q 40 페이지.

페이지 인쇄
Asus C1241Q 사용자 설명서
5.
Image
Set the image related setting from this menu.
•
Sharpness: The adjusting range is from 0 to 100.
•
Trace Free: Adjusts the response time of the monitor.
•
Aspect Control: Adjusts the aspect ratio to full, 4:3, 1:1 or OverScan.
•
VividPixel: Enhances the outline of the displayed picture and generates
high-quality images on screen.
•
ASCR: Turns on/off the ASCR (ASUS Smart Contrast Ratio) function.
•
Adaptive-Sync/FreeSync (DisplayPort and HDMI only): Allows an
Adaptive-Sync/FreeSync supported* graphics source to dynamically
adjust display refresh rate based on typical content frame rates for power
efficient, virtually stutter free and low-latency display update.
* Adaptive-Sync/FreeSync (DisplayPort and HDMI only) can only be activated
within 48Hz ~ 75Hz.
* For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.
•
Position (Only available for VGA input): adjusts the horizontal position
(H-Position) and the vertical position (V-Position) of the image. The
adjusting range is from 0 to 100.
•
Focus (Only available for VGA input): reduces Horizonal-line noise
and Vertical-line noise of the image by adjusting (Phase) and (Clock)
separately. The adjusting range is from 0 to 100.
•
•
•
Auto Adjust.: Automatically adjusts the image to its optimized position,
clock, and phase (for VGA mode only).
3-6
Image
S har p nes s
T r ace F r e e
A spe ct C on tr ol
V ivi dP ix el
A SC R
A dap tive - S ync
P osi tio n
Mor e
4:3 is only available when input source is in 4:3 format. OverScan is only
available for the HDMI input source.
Phase adjusts the phase of the pixel clock signal. With a wrong phase
adjustment, the screen shows horizontal disturbances.
Clock (pixel frequency) controls the number of pixels scanned by one
horizontal sweep. If the frequency is not correct, the screen shows vertical
stripes and the image is not proportional.
ASUS C1241
Standard Mode
HDMI 1920 x 1080 @ 60Hz
Chapter 3: OSD (On-Screen Display) menu