Baumer VeriSens CS Series 빠른 시작 매뉴얼 - 페이지 15

{카테고리_이름} Baumer VeriSens CS Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer VeriSens CS Series 44 페이지.

Add new feature checks

Now you can determine which features of the object to

be checked.

The command to link new feature checks is located in the

right hand corner of the parameter area. With the

button, you can create a new feature check for your job.

As each inspection process has tolerances with regard

to the position of the test object, most jobs begin

with part location. The part location searches for

the reference edges of the test object and aligns all

subsequent feature checks to these reference edges.

After selection of a feature check you can parametrize

the feature to be checked. Each feature is optimized for

just one inspection task and supplies a Pass (OK) or

Fail (NOK) result.

Example:

Setting of feature check

For this example, select the feature check

the tab

FEATURE COMPARISON

feature check with OK.

In the example, the working area is dragged as a circle.

Adjust it by clicking on area's center and holding the left

mouse button depressed.

English

BRIGHTNESS

. Confirm selection of this

ADD

15 15