Baumer HOG 9 설치 및 운영 지침 매뉴얼 - 페이지 27
{카테고리_이름} Baumer HOG 9에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer HOG 9 36 페이지. Incremental encoder (twin encoder)
Baumer HOG 9에 대해서도 마찬가지입니다: 설치 및 작동 지침 (36 페이지)
페이지 인쇄
7.5
Anschlusskabelbelegung (Option)
Das Kabel sollte in einem Stück und ge-
trennt von Motorkabeln verlegt werden.
Kabelabschluss:
Version DN ... I:
Version DN ... TTL und DN ... R: 120 Ω
Länge und Konfektionierung wie bestellt
Length and conditioning like precised on order
7.6
Sensorkabel HEK 8 (Zubehör)
Es wird empfohlen, das Baumer Hübner
Sensorkabel HEK 8 zu verwenden oder er-
satzweise ein geschirmtes, paarig verseiltes
Kabel. Das Kabel sollte in einem Stück und
getrennt von Motorkabeln verlegt werden.
Kabelabschluss:
Version DN ... I:
Version DN ... TTL und DN ... R: 120 Ω
Rot/Red = +UB
Blau/Blue =
Weiß/White = A+
Braun/Brown = A-
Grün/Green = B+
Gelb/Yellow = B-
Grau/Grey = R+
Rosa/Pink = R-
Schwarz/Black = Err-*
Violett/Violet = *
* Nur bei Version mit EMS
Only for version with EMS
MB004T1 - 11068581
1 ... 3 kΩ
1 ... 3 kΩ
Baumer_HOG9-HOG9G-T1_II_DE-EN (15A1)
Elektrischer Anschluss / Electrical connection
7.5
Connecting cable assignment (option)
Continuous wiring without any splices or
couplings should be used. Separate signal
cables from power cables.
Cable terminating resistance:
Version DN ... I:
Version DN ... TTL and DN ... R: 120 Ω
Rot/Red = +UB
Weiß/White = A+
Braun/Brown = A-
Rosa/Pink = R-
Blau/Blue =
7.6
Sensor cable HEK 8 (accessory)
Baumer Hübner sensor cable HEK 8 is rec-
ommended. As a substitute a shielded twisted
pair cable should be used. Continuous wiring
without any splices or couplings should be used.
Separate signal cables from power cables.
Cable terminating resistance:
Version DN ... I:
Version DN ... TTL and DN ... R: 120 Ω
Aderendhülsen benutzen.
Use core-end ferrules.
Kabelschirm
Cable shield
Grün/Green = B+
Gelb/Yellow = B-
Grau/Grey = R+
7
1 ... 3 kΩ
1 ... 3 kΩ
24