Baumer HOGS 100 S 설치 및 운영 지침 매뉴얼 - 페이지 27
{카테고리_이름} Baumer HOGS 100 S에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Baumer HOGS 100 S 36 페이지. Sine encoder with function safety
Baumer HOGS 100 S에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (32 페이지)
페이지 인쇄7.3
Sensorkabel (Zubehör)
Es wird empfohlen, das Baumer Hübner
Sensorkabel HEK 8 HQ oder HEK 8 zu
verwenden, ersatzweise ein geschirmtes,
paarig verseiltes Kabel. Das Kabel sollte in
einem Stück und getrennt von Motorkabeln
verlegt werden.
Kabelabschluss:
7.3.1
Kabelbelegung HEK 8 HQ
Braun/Brown = +UB
Weiß/White =
Grün/Green = K1 (A+)
Gelb/Yellow = K1 (A-)
Blau/Blue = K2 (B+)
Rot/Red = K2 (B-)
Grau/Grey = K0 (R+)
Rosa/Pink = K0 (R-)
7.3.2
Kabelbelegung HEK 8
Rot/Red = +UB
Blau/Blue =
Weiß/White = K1 (A+)
Braun/Brown = K1 (A-)
Grün/Green = K2 (B+)
Gelb/Yellow = K2 (B-)
Grau/Grey = K0 (R+)
Rosa/Pink = K0 (R-)
Schwarz/Black =
Violett/Violet =
MB183b - 11076867
120 Ω
2x 1,0 mm
/ 2x AWG18
2
(0V)
2x 0,5 mm
2
(0V)
---.
---.
4x (2x 0,25 mm
Baumer_HOGS100S_II_DE-EN (16A3)
Elektrischer Anschluss / Electrical connection
7.3
Sensor cable (accessory)
Baumer Hübner sensor cable HEK 8 HQ
or HEK 8 is recommended. As a substitute
a shielded twisted pair cable should be
used. Continuous wiring without any splic-
es or couplings should be used. Separate
signal cables from power cables.
Cable terminating resistance: 120 Ω
7.3.1
Cable assignment HEK 8 HQ
3x (2x 0,14 mm
) / 3x (2x AWG26)
2
7.3.2
Cable assignment HEK 8
/ 2x AWG21
) / 4x (2x AWG24)
2
Aderendhülsen benutzen.
Use core-end ferrules.
Kabelschirm
Cable shield
Aderendhülsen benutzen.
Use core-end ferrules.
Kabelschirm
Cable shield
7
24