Asus ZenWiFi Pro ET12 빠른 시작 매뉴얼 - 페이지 4
{카테고리_이름} Asus ZenWiFi Pro ET12에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus ZenWiFi Pro ET12 5 페이지. Axe11000 tri band router
Asus ZenWiFi Pro ET12에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄
Quick
Start Guide
GT-AXE11000
ROG Rapture GT-AXE11000 Tri-band
Gaming Router
* If no 6GHz SSID is displayed, please check whether your OS and client device are fully licensed to support the newly
released 6GHz band. You can check with your OS and client device provider for Wi-Fi 6E driver release schedule.
One Router Setup Steps
01
Prepare your Modem
Unplug the power of cable / DSL modem. If it
1
has a battery backup, remove the battery.
Unplug
Install your Router
02
Plug the adapter into the DCIN port, and press the Power switch.
1
– Via app
[App] On your iOS or Android mobile device, go
3
to the app store, search for ASUS Router, and
download the app.
– Or via web browser
[Wired] Connect your PC to LAN port at the back
3
side of the router using an additional network
cable.
2.5G Port WAN Type Setup Steps
01
Prepare your Router
Connect the modem to the 2.5G port with a network
cable.
WE SUGGEST...
Connect your modem to WAN
2
port at the back side of the router
with the network cable provided.
Power on the modem. Plug
3
modem to the power outlet and
power on.
Modem back
[App] On your iOS or Android mobile device, tap Settings > Wi-Fi,
4
connect to the default network SSID shown on the product label on
the back side of the router. Or scan the QR code on the product label
to connect the default network SSID.
[Wireless] Connect to the network with default SSID
shown on the product label on the back side of your
router "ASUS_XX".
02
Login and Connect
[ASUS Setup Wizard] Select "manual setting".
1
Hardware Explanations
Power (DCIN) port
Reset button
WAN (Internet) port
Power switch
LAN ports 1-4
Specifications:
DC Power adapter
DC Output: +19V with max 3.42A current
DC Output: +19.5V with max 3.33A current
Operating Temperature 0~40
o
C
Operating Humidity
50~90%
4
Modem back
The power LED will light up when the hardware is ready.
2
5
* XX refers to the last two
_
digits of 2.4GHz MAC
address. You can find it
on the label on the back
of your ROG router.
[Wired / Wireless] Open a web browser.
4
You will be redirected to the ASUS Setup Wizard. If not, navigate to
http://router.asus.com.
Follow the instructions to
complete the setup.
– Setting to 2.5G WAN under factory default settings
[ASUS Setup Wizard] Select "2.5G Ethernet", then follow the instructions
2
to complete the setup of SSID and login information.
WAN (Internet)
LAN
2.5G WAN/LAN
LED
LED
port LED
2.5G WAN/LAN port
WPS button
Boost Key
Storage
0~70
o
C
Storage
20~90%
Check the modem LED lights to ensure the connection is active.
Modem front
[App] Launch ASUS Router App and follow
the instructions to complete the setup.
6GHz/5GHz/2.4GHz
Power LED
Wi-Fi LED
Wi-Fi On/Off button
If you are using DSL for internet,
you will need your username
/ password from your Internet
service provider (ISP) to properly
configure your router.