Asus AP100 하드웨어 참조 매뉴얼 - 페이지 18

{카테고리_이름} Asus AP100에 대한 하드웨어 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus AP100 32 페이지. Pentium ii startup server

II. System Components

Air Circulation System

The server's air circulation system is comprised of one 3 inch (8 cm) fan mounted

on the inside rear of the chassis and another one mounted on the front of the

chassis, as well as the power supply itself. The air circulation system cools the

internal system by bringing fresh air in from the back and forcing the hot air out

through the front. It is important to keep the air surrounding the hard disk drives

below 122˚F (50˚C) to prevent hard disk failures.

IMPORTANT:

The two individual fans are secured by plastic housings. The fan housings

can be removed by pressing in the clip and sliding the housing upward.

This server has a standard speaker for error notifications and other alerts.

For computer audio capability, an audio card and external speakers are nec-

essary. The standard system speaker mounts in the chassis as shown here.

To remove the speaker, press the metal clip (or pry from front) with a screw-

driver and lift the speaker upward.

The chassis panels must be installed for proper air flow.

AP100 Hardware Reference Guide

Press clip with screw driver to release

IMPORTANT:

ing the fans, be sure that both fans

rotate in the same direction. Use the

manufacturer's sticker on one side

of the fan as a reference. The air

should flow from the rear of the

chassis to the front of the chassis.

Press clip (or pry from front)

with screwdriver to release

When replac-