Asus AP3000 하드웨어 참조 매뉴얼 - 페이지 30

{카테고리_이름} Asus AP3000에 대한 하드웨어 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asus AP3000 42 페이지. Dual pentium ii server platform

• 4-10. Front Cooling Fans

The front cooling fan module consists of a control board, a hard disk

drive LED status board, and two cooling fans. The message LED

board mounted in the front of the cooling fan module consists of five

sets of LEDs to represent the status of up to five hard disk drives.

Each set has three LEDs which can show the power, activity, and

status of each hard disk drive.

The front cooling fans' main purpose is to cool the hard disk drives.

These fans can be removed by using a small screw driver to push the

eject mechanism in the fan module. The eject mechanism is behind a

small hole as circled below. There are two individual 2 1/4 inch (6cm)

fans secured by four screws on each fan. The ASMA software will

report an error message when any of these two fans malfunctions.

Lower Fan

IMPORTANT

Usually, the rotation of the fan sends air toward the manufacturer's

label on the center of the fan.

IV. Hardware Setup

Front Cooling Fan Control Board

(mounted with the component side

facedown)

ß‚§‚

Hard Disk Drive Message Board (LEDs)

AP 3000 Hardware Reference Guide

Upper Fan