AmpliVox SW800-96-02 사용자 설명서 - 페이지 8

{카테고리_이름} AmpliVox SW800-96-02에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AmpliVox SW800-96-02 12 페이지. Titan wireless battery powered pa system

WIRELESS SPEAKER TRANSMITTER (OPTIONALEQUIPMENT)

OPERATES ON DIFFERENT FREQUENCIES THAN AMPLIVOX WIRELESS MICROPHONE / RECEIVER

96 CH UHF WIRELESS SPEAKER TRANSMITTER

FEATURES

•

Channel Display (A) Frequency: 514 - 544 MHz

•

Select Buttons - Manual Channel Selection (B) Up / Down

•

Power / Volume Control (C)

•

Set Button (E)

•

Level Indicator (D)

•

AF - Audio Frequency Indicator (F) lights when transmitting

•

TX - Radio Frequency Indicator (G) lights when turned on

SETUP

• The transmitter has its own POWER / VOLUME Control (C). Turn Main Power On of the SW800-96, then turn transmit-

ter Power On (C). A Frequency Channel will appear in the Channel Display (A). To change, press the set button. Chan-

nel number will flash. Press Select Buttons (B) to select a channel. DO NOT SELECT SAME CHANNEL AS THE MI-

CROPHONES ARE SET TO. Channel number must match channel number on wireless receiver of the SC800-96

Speaker. EXAMPLE: Select Channel 50 on transmitter of SW800-96 and select Channel 50 on the speaker re-

ceiver of the SC800-96. Press set button again to lock channel. The AF LED will light when transmitting signal to re-

ceiver of the SC800-96. RX LED (F) of receiver (SC800-96) will light when channels are matched and receiving a signal.

OPERATE

• SW800-96: turn on main power / wireless microphone receiver / wireless speaker transmitter / wireless microphone.

• SC800-96: turn on main power / wireless speaker receiver.

• To start, set all volume controls of the wireless devices about half way between OFF and MAX. Test speaking into the

wireless microphone and adjust level of main volume controls first to the desired level. If you feel that you need to in-

crease sound level then adjust levels of the wireless devices.

SW800-96

SC800-96

Equipment shown in

pictures may look

different compared to

yours.