Ampro NEO 300 BEAM 사용자 설명서 - 페이지 4
{카테고리_이름} Ampro NEO 300 BEAM에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ampro NEO 300 BEAM 18 페이지. Moving head
페이지 인쇄•
There are safety cord holes at the bottom of the base
of a projector. In view of safety, please run the safety
cord supplied through the safety cord holes for safety
support.
•
Before any installation, maintenance and cleaning
work, please ensure the projector is disconnected from
power mains.
•
After stable operation under normal situation , its
temperature is 80°C.
•
While the lamp is stricken for the first time, there will
be smoke and strange smell. It's normal and does not
mean the projector has some defects.
•
While it running, don't touch the metal housing to avoid
being burned!
•
Do not mount the projector directly on inflammable
surface.
3. FIXTURE OVERVIEW
1 DIMENSION
270º
270º
P. 4
English Version | NEO 300 BEAM
•
Do not project the beam straightly on combustible
items and the minimum distance between the projector
and illuminated items is 8m.
•
A projector should be installed with good ventilation
and the minimum distance between the projector and
walls is 50cm. At the same time, please ensure the fans
and air inlets and outlets are workable.
•
Do not let the front lens under sunlight or other strong
light sources at any angle, otherwise the danger of fire
can be caused by the focused beam by the lens inside a
projector.
•
The product meets The General Technical
Requirements and Standards for Recycle and Use Of.
•
Expired Appliance and Electronic Products.
•
When the product meets disposal standards and needs
to be disposed, a client needs to dispose and recycle it.
270º