Amprobe DM78C 사용자 설명서 - 페이지 8

{카테고리_이름} Amprobe DM78C에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amprobe DM78C 15 페이지. Digital pocket multimeter

oPERAtIoN

Beeper

Note: The beeper sounds for function change,

Range Lock, Range Hold, and continuity.

Ranging: The meter defaults to autoranging

when turned on, and selects the range

automatically. For Manual Ranging: press

"Range lock" Button to hold selected range (

on the display). Pressing "Range lock" again

steps to next range. hold button for 2 sec. to

return to Autorange mode.

Data Hold: Press the "Data hold" Button to

turn on ("h" displayed) and off the function.

last reading is held on the display. Press "h"

button again to release and display present

readings.

Selector Switch: when the Selector Switch is

in the Ω �� position, press the "Function

Select" Button for resistance (Ω) continuity

test (Ω and �), or diode test (�). when the

Selector Switch is in VolT position, press the

"Function Select" Button to select AC voltage

or DC voltage.

Auto Power off (APo): Meter will turn off after

0 minutes of non-use. APo can be disabled by

pressing and holding the (RAngE) button while

moving the function switch from off to desired

function.