Amptone Lab XY MIDIpad 사용자 설명서 - 페이지 3

{카테고리_이름} Amptone Lab XY MIDIpad에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amptone Lab XY MIDIpad 12 페이지. Xy midipad midi controller user's manual

I. INFORMATION

XY MIDIpad is a MIDI controller based on the touch screen

mounted in guitar body. Every MIDI device is assigned to

different channel (Kaoss Pad – 1, Whammy – 2, synth – 3).

XY MIDIpad sends two MIDI messages: X and Y positions.

The user can also change the programs of an active device.

XY MIDIpad is equipped with the LED able to display any

colour from RGB mode. It provides attractive visual effect

while moving your finger on the touch screen (depending

on the finger position and its speed) and informs on the

active MIDI channel.

II. THE KIT

- microcontroller

Microcontroller is the core of the XY MIDIpad system. It

processes the information from touch screen, button and

encoder and converts it into MIDI messages. It also

controls the LED. Two screws are included, allowing the

user to mount the enclosure inside the guitar body.

- touch screen

It's the main element of XY MIDIpad. Finger position

points two messages which are sent to a MIDI device (X

and Y positions).

- hold button

It enables to send MIDI information on finger positioning

permanently. Thanks to that, the user can focus on

playing guitar, while the MIDI messages are being sent.

The button is surrounded by a diode which indicates

whether the hold function is active or not.

- encoder

It allows the user to change the program of currently

active device. It is also used to change the channel.

Changing the channels is quick and simple and the

controller easily works onstage when you need to control