Amrotec CC-03 사용자 설명서 - 페이지 9

{카테고리_이름} Amrotec CC-03에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Amrotec CC-03 19 페이지. Coin counter heavy-duty with conveyor

4. Setting the coin size

Before you start counting, set always the thickness and diameter according the coin size you want to

count.

Note: Smaller coins will rejected but larger coins stay in the machine and may cause jams.

Thickness adjuster

Diameter adjuster

If tokens or other coins need to be count, those are not marked on the scale, set the correct size as

follow:

Note: Do not open or close the Right top cover with open Hopper door!

a) Thickness

Open the right top cover and the hopper door. Turn the Thickness adjuster to maximum. Place the

token under the thickness block and turn the adjuster slowly down until it gently touch the token.

Turn the adjuster backward until the token moves freely, without resistance, between disc and

thickness block.

b) Diameter

Lift up the transport belt. Turn the Diameter adjuster to maximum. Place the token on the transport

track and turn the adjuster slowly narrow until it gently touch the token. Turn the adjuster

backward until the token moves freely and has side clearance of about 0.4 mm.

9 of 17