AMS AS5600 매뉴얼 - 페이지 5
{카테고리_이름} AMS AS5600에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AMS AS5600 14 페이지. 12-bit programmable contactless potentiometer
AMS AS5600에 대해서도 마찬가지입니다: 운영 매뉴얼 (12 페이지), 사용자 설명서 (13 페이지), 운영 매뉴얼 (10 페이지)
페이지 인쇄
- 1. Table of Contents
- 1. 1 Introduction
- 1. Kit Content
- 2. 2 Board Description
- 3. 3 Software
- 3. Labview
- 3. Using the Arduino IDE
- 3. Installing the Arduino Library
- 3. Reading out the AS5600 Sensor
- 4. 4 AS5600-POTUINO Hardware
- 4. AS5600-POTUINO Schematics
- 4. AS5600-POTUINO PCB Layout
- 5. 5 Ordering & Contact Information
- 6. 6 Copyrights & Disclaimer
AS5600 Adapter Board
3
Software
Custom firmware source code can be generated using the Arduino IDE. An example code and
Arduino library is available for reference. In addition, the AS5600 LabVIEW Evaluation GUI software
can be used to readout and configure the AS5600.
3.1
LabVIEW
The AS5600 LabVIEW Evaluation GUI supports the Arduino UNO. The latest version of the
software can be downloaded from the ams webpage.
Before the Arduino UNO can be used together with the POTUINO shield the LabVIEW interface
firmware has to be flashed onto the Arduino. Easiest way to do this is to download the free software
tool XLoader.
Figure 3: XLoader for flashing the Arduino UNO
Choose the LIFA_Base_AS5600.hex file which is also available for download from the ams
webpage. Then choose the Uno(ATmega328) in the Device dropdown menu. After this choose the
correct COM port which can easily be checked in the Windows Device Manager and finally click
Upload.
ams Eval Kit Manual, Confidential
[v1-0] 2015-Jan-21
Page 5
Document Feedback