Electrolux EW 1478 F 지침 책자 - 페이지 12

{카테고리_이름} Electrolux EW 1478 F에 대한 지침 책자을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux EW 1478 F 27 페이지.

Altering the delayed start

• Depress START/PAUSE button

• Depress DELAY START button until the required

time is displayed.

If you wish to cancel the delay, depress the button

only once: the symbol 0 h is displayed.

• Depress START/PAUSE button again.

12 DISPLAY

The display shows the following information:

Cancelling - Duration of the programme -

Delayed start - Incorrect option selection - Alarm

code.

Cancelling

If a programme has been cancelled - programme

selector dial on position O - three flashing dashes

appear on the display.

---

Now you can select a new programme.

Duration of the selected

programme

After selecting a programme, the duration is

displayed in hours and minutes ( for example 2.05).

2.05

The duration is calculated automatically on the basis of

the maximum recommended load for each type of fabric.

After the programme has started, the time remaining

is updated every minute.

When the programme has finished a flashing zero

is displayed.

If you have selected the Anti-crease option SUDA

BEKLETME, the zero will not flash.

The selected delay (24 hours max) set by means of

the relevant button appears on the display for 4

seconds, then the duration of the previously selected

programme is displayed.

The countdown is updated every hour.

If an option which is not compatible with the set wash

programme is selected, the message Err is

displayed.

In the event of operating problems, some alarm

codes can be displayed, for example E20

(see page 25).

Delayed start

Incorrect option selection

Alarm codes

E20