Drazice OKH 160 NTR 운영 및 설치 매뉴얼 - 페이지 5
{카테고리_이름} Drazice OKH 160 NTR에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drazice OKH 160 NTR 17 페이지. Tank type indirect water heaters
Drazice OKH 160 NTR에 대해서도 마찬가지입니다: 작동 및 설치 매뉴얼 (14 페이지), 작동 및 설치 매뉴얼 (16 페이지), 작동 및 설치 매뉴얼 (12 페이지)
페이지 인쇄
1.3 DESIGN AND BASIC DIMENSIONS OF TANK
The tank receptacle is made of steel plate and tested at 0.9 MPa of overpressure. The inside of the
receptacle is enamelled. A flange is welded onto the lower bottom of the receptacle with a flange lid
screwed onto it. A sealing ring is inserted between the flange lid and the flange. Thermowells for
thermostat sensors and thermometer installation are placed in the flange lid. An anode rod is mounted
onto the M8 nut. The water reservoir is insulated by means of polyurethane foam. Electric wiring is placed
underneath the plastic removable cover. The temperature of water can be set using the thermostat. Heat
exchanger is welded in pressure receptacle.
Technical description: OKH 100 NTR, OKH 125 NTR, OKH 160 NTR
Figure 1
Technical description: OKH 100 NTR/HV, OKH 125 NTR/HV
Figure 2
- 5 -