Drazice OKC 250 NTRR 작동 및 설치 매뉴얼 - 페이지 12

{카테고리_이름} Drazice OKC 250 NTRR에 대한 작동 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Drazice OKC 250 NTRR 19 페이지. Water heaters for solar systems
Drazice OKC 250 NTRR에 대해서도 마찬가지입니다: 작동 및 설치 매뉴얼 (17 페이지)

페이지 인쇄
Drazice OKC 250 NTRR 작동 및 설치 매뉴얼
300, 400 a 500 litre capacity heaters are screwed onto the bottom wooden palette with
M12 screws. When the heater is released from the palette and prior to its putting into
operation, 3 screw legs supplied as the product accessories have to be installed. With
these adjustable legs, the heater may be positioned vertically to the base, within 10 mm.

2 OPERATION AND FITTING INSTUCTIONS

2.1 OPERATING CONDITIONS

The tank shall only be used in accordance with the conditions specified on the power plate
and in instructions for electric wiring. Besides legally acknowledged national regulations and
standards, also conditions for connection defined in local electric and water works have to
be adhered to, as well as the installation and operation manual.
The temperature at the place of heater installation must be higher than +2°C; and the room
must not freeze. The appliance has to be mounted at a convenient place; it means that the
appliance must be easily available for potential necessary maintenance, repair or
replacement, as the case may be.
We would like to emphasise that the heater must not be connected to power supply if
work involving flammable liquids (petrol, spot remover) or gases, etc., is performed
nearby.
- 12 -