Electrolux WWX111REW0 소유자 매뉴얼 - 페이지 9

{카테고리_이름} Electrolux WWX111REW0에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux WWX111REW0 14 페이지.

페이지 인쇄

Care and Cleaning

Use care with laundry

products. They can damage finish on

the washer.

Follow Winterizing

Instructions for cold

weather care.

Inside

•

Remove items from the washer as soon as the cycle ends. Excess wrinkling, color

transfer, and odors may develop in items left in the washer.

•

Dry the washer top, the area around the lid opening, and the underside of the

lid. These areas should always be dry before the lid is closed.

•

Before cleaning the washer interior, unplug the electrical power cord

avoid electrical shock hazards.

•

When extremely soiled items have been washed, a dirty residue may remain on

the tub. Remove this by wiping the tub with a nonabrasive household cleanser.

Rinse thoroughly with water.

•

The agitator or tub may become stained from fabric dye. Clean these parts with

a nonabrasive household cleanser. This prevents dye transfer to future loads.

Outside

•

When washing is completed, wipe top and sides of washer with a damp cloth.

Turn water faucets off to prevent pressure build-up in the hoses.

•

As needed, clean the cabinet with mild soap and water. Never use harsh,

gritty or abrasive cleansers.

gritty or abrasive cleansers. If top or lid becomes stained, clean with diluted

gritty or abrasive cleansers.

chlorine bleach [1/2 cup (120 ml) in 1 quart (.95 L) water]. Rinse several times

with clear water.

•

Remove glue residue from tape or labels with a mixture of warm water and mild

detergent. Or, touch residue with the sticky side of the tape or label.

• • • • •

Before moving the washer, place a strip of cardboard or thin fiberboard under

Before moving the washer,

the front leveling legs to prevent floor damage.

Winterizing Instructions

If the washer is stored in an area where freezing can occur or moved in freezing

temperatures, follow these winterizing instructions to prevent damage to the

washer:

1 . Turn off water supply faucets.

2 . Disconnect hoses from water supply and drain water from hoses.

3 . Plug electrical cord into a properly grounded electrical outlet.

4 . Add 1 gallon nontoxic recreational vehicle (RV) antifreeze to empty wash tub.

C l o s e l i d .

5 . Set cycle selector knob at a spin setting. Pull out knob and let washer spin for

1 minute to drain out all water. Not all of the RV antifreeze will be expelled.

6 . Push in knob, unplug electrical power cord, dry tub interior, and close lid.

7 . Store washer in an upright position.

8 . To remove antifreeze from washer after storage, run empty washer through a

complete cycle using detergent. Do not add wash load.

unplug the electrical power cord

unplug the electrical power cord to

unplug the electrical power cord

Never use harsh,

Do not add wash load.