Anchor ETI 30’CLASSIC FRAME TENTS 조립 지침 매뉴얼 - 페이지 4

{카테고리_이름} Anchor ETI 30’CLASSIC FRAME TENTS에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Anchor ETI 30’CLASSIC FRAME TENTS 8 페이지.

30'

CLASSIC FRAME TENTS

EAVE ASSEMBLY

Slide a (14'4") Side Eave Bar into each

eave connector opening of the four

Corner Fittings until the snap buttons

engage. The rafter connector opening

of the Corner Fitting should be pointing

up and inwards, and the leg connector

opening should be pointing downwards.

Then attach the other end of the Side

Eave Bars to the eave connector

opening of a Mid-Leg Rafter Fitting until

the snap buttons engage. Be sure the

rafter connector opening of the Mid-Leg

Rafter Fitting is pointing inwards and

the leg connector opening is pointing

downwards. On the 30-foot side, there

will only be one Mid-Leg Rafter Fitting

that connects both Side Eave Bars.

For the 40-foot side, slide each end of

a (9'4") Side Eave Bar into the eave

connector openings of the Mid-Leg

Rafter Fittings, connecting both ends.

Be sure the snap buttons engage.

(Repeat for structures longer than 40')

You should now have a completed eave

section.

ASSEMBLY INSTRUCTIONS