Electrolux AOFP201RU 운영 및 유지보수 지침 매뉴얼 - 페이지 14

{카테고리_이름} Electrolux AOFP201RU에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux AOFP201RU 27 페이지. Bcf 30kg 6 gn1/1 lw (240/3/60hz), bcf 50kg 10 gn1/1 lw (240/3/60hz) / bcf 100kg 20 gn1/1 lw (240/3/60hz) / bcf 70kg 10 gn2/1 lw (240/3/60hz) / bcf 180kg 20 gn2/1 lw (240/3/60hz) / bcf 30kg 6 gn1/1 lw (208/3/60hz) / bcf 50kg 10 gn1/1 lw (208/3/60hz) / bcf
Electrolux AOFP201RU에 대해서도 마찬가지입니다: 매뉴얼 (11 페이지)

페이지 인쇄

C.1.9.4 REFERENCE STANDARD

The machine can be set to 3 different Standards:

1. Electrolux Food Safe Mode 1

2. Electrolux Food Safe Mode 2

3. U.S. Standard

The default setting for the appliance is the NSF rule number

seven, which states that the product is chilled from 140°F/60°C

to 39.2°F/4°C in 240'.

Standard

Chilling start

temperature

+145.4ºF (+63ºC) +50ºF (+10ºC)

Electro lux Fo o d Safe M 1

+158ºF (+70ºC) +37.4ºF (+3ºC)

Electro lux Fo o d Safe M 2

CbSt ºC

U.S.Standard

Standard

Chilling start

temperature

+145.4ºF (+63ºC) -0.4ºF (-18ºC)

Electro lux Fo o d Safe M 1

+158ºF (+70ºC) -0.4ºF (-18ºC)

Electro lux Fo o d Safe M 2

CbSt ºC

U.S.Standard

Section C.2.2.6 describes how to change the STANDARD (e.g.

to go from the Electrolux Food Safe Mode 1 to the Electrolux Food

Safe Mode 2).

THE REFERENCE STANDARD SELECTION CAN BE

CHANGED ONLY WHEN THERE IS NO CYCLE RUNNING. If a

chilling cycle is running the system will automatically exit the

utility.

The Standard indicator light is normally off. It lights up only when

the Reference Standard option is entered with the UTILITIES

button.

Mode setting "U.S. Standard" is conformed to the requirements

of NSF 7.

Limits are:

- soft chilling =

240 minutes;

- hard chilling =

240 minutes;

Example of NATIONAL SANITATION FOUNDATION:

A positive blast chilling cycle with probe ends correctly if the

39.2°F (4ºC) is reached within 240'. The chilling then proceeds

either until the maintaining temperature set by the manufacturer

is reached or the user presses STOP.

The user can edit the parameter settings in the U.S. Standard

option (CbSt , CCEt, CctI, CFEt, CftI) either in USER PARAMETERS,

section C.1.9.5, or by selecting the utility directly (see section

below for instructions on how to edit the U.S. Standard

parameters).

BLAST CHILLER

Chilling end

Chilling time

temperature

110 minutes

90 minutes

CCEt ºC

CCtI minutes

BLAST FREEZER

Chilling end

Chilling time

temperature

270 minutes

240 minutes

CFEt ºC

CFtI minutes

NSF 7

140 (+60) / 39.2 (+4)

Editing USER parameters

To edit a parameter, select the utility:

• press the

button;

• the display blinks to show that the parameter is in 'edit' mode;

• press the

setting range;

• press the button to confirm the settings; if a selection is not

made after 5 seconds, the last value displayed will be confirmed

automatically, or press

NOTE: the parameters can be edited ONLY if no cycle is running.

If a cycle is running, the utility will enable only the display of the

parameters.

The system exits the function automatically after 12 seconds if

nothing else is pressed.

C.1.9.5 USER PARAMETERS

For displaying/editing the operating parameters:

• the "TEMPERATURE" display shows the parameter label;

• the "TIME" display shows the value associated to the parameter;

•

scroll the parameters;

The system exits the function automatically after 12 seconds if

nothing else is pressed.

C.1.9.6 HACCP

Displays the chamber high temperature alarm and the blast

chilling cycle end error alarm (see section C.4. for all information

on alarms).

C.1.9.7 SERVICE ALARMS

The SERVICE ALARM function stores and displays all the

alarms, except for the chamber high temperature alarm and the

blast chilling cycle end error alarm (see sections C.4.1 for all

information on alarms).

buttons to change the value within the

again.