ATIGO A501S 설치 매뉴얼 - 페이지 3
{카테고리_이름} ATIGO A501S에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ATIGO A501S 5 페이지. 2 wire kit
페이지 인쇄
Electric lock powered by door
station lock output.
Note:
The jumper must be set correctly (fig. 1).
The lock output is limited to 12Vdc, and a
maximum current of 250mA.
Setting lock type - DIP switch 5
ON
Fail locked (normally closed)
OFF
Fail unlocked (normally open)
fig.1
Electric lock powered by
additional power supply
Note:
The jumper must be set correctly (fig. 2).
The power supply must be used accordingly
to lock specification.
The dry contact is limited to 24Vac or 24dc,
and a maximum current of 1000mA.
Setting lock type - DIP switch 5
ON
Fail locked (normally closed)
OFF
Fail unlocked (normally open)
fig.2