Andesfit Health ADF-B27A 사용자 설명서 - 페이지 14

{카테고리_이름} Andesfit Health ADF-B27A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Andesfit Health ADF-B27A 18 페이지.

2.Press "M" again, the most recent test results with date and time

will display. Press "M" once more and the next most recent test

results will appear. Each time you press and release "M", the

meter will recall up to your last 500 test results in order. Press

the "S" to turn off the meter. When the memory is full, the oldest

result is dropped and the newest result is added.

FCC warning

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired operation.

CARE AND STORAGE FOR YOUR SYSTEM

◆ Handle the meter with care. Dropping or throwing the meter

may cause damage to the device.

◆ Don't expose the Blood Glucose Monitoring System, Test strip,

and Control Solution, to extreme conditions, such as high

humidity, heat, freezing cold or dust. The storage conditions

for the test strips are 39

conditions for the meter are -40

◆ Always wash your hands with soap and water and rinse and

dry completely before handling the Blood Glucose Monitoring

system and Test strip.

◆ Use CaviWipes (see below) to clean the Blood Glucose Monit

oring System.

◆ Discard the used lancet into a container for sharp objects.

The cleaning and disinfection is absolutely necessary for

the test procedure, because cleaning can insure the meter

works well (for example, display will be clear to see after

cleaning); and disinfection can avoid the infection to you

or to the other people, and the cross-infection. We strongly

warn that the device should be cleaned and disinfected

following use on every patient.

86 , Humidity＜85%RH. Storage

131 , Humidity＜80%RH.