Electrolux LUT9ME28W4 사용자 설명서 - 페이지 18
{카테고리_이름} Electrolux LUT9ME28W4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux LUT9ME28W4 24 페이지.
페이지 인쇄
18
www.electrolux.com
Problem
Water flows on the floor.
Temperature cannot be
set.
The temperature in the ap‐
pliance is too low/too high.
The WiFi does not connect
with the appliance, the Wi‐
Fi indicator blinks.
Possible cause
Temperature is set incor‐
rectly.
Appliance is fully loaded
and is set to the lowest
temperature.
Temperature set in the ap‐
pliance is too low and the
ambient temperature is too
high.
The melting water outlet is
not connected to the evap‐
orative tray above the com‐
pressor.
The Extra Freeze function
is switched on.
The temperature is not set
correctly.
The door is not closed cor‐
rectly.
The food products' temper‐
ature is too high.
Many food products are
stored at the same time.
The door has been opened
often.
The Extra Freeze function
is switched on.
There is no cold air circula‐
tion in the appliance.
The WiFi router does not
work.
Solution
Refer to "Operation" chap‐
ter.
Set a higher temperature.
Refer to "Operation" chap‐
ter.
Set a higher temperature.
Refer to "Operation" chap‐
ter.
Attach the melting water
outlet to the evaporative
tray.
Switch off the Extra Freeze
function manually, or wait
until the function deacti‐
vates automatically to set
the temperature. Refer to
"Extra Freeze function"
section.
Set a higher/lower temper‐
ature.
Refer to "Closing the door"
section.
Let the food products tem‐
perature decrease to room
temperature before stor‐
age.
Store less food products at
the same time.
Open the door only if nec‐
essary.
Refer to "Extra Freeze
function" section.
Make sure that there is
cold air circulation in the
appliance. Refer to "Hints
and Tips" chapter.
Check whether the router
is ON and if other connec‐
ted devices are working. If
the router was OFF, turn it
ON, wait for a few minutes
and check again.