Electrolux SG256N 사용자 설명서 - 페이지 15
{카테고리_이름} Electrolux SG256N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux SG256N 44 페이지.
페이지 인쇄8.4 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the E.E.C.
Directives.
8.5 Removing the transport
support
Your appliance is equipped with transport
support to secure the door during
transportation.
1. Open the door.
2. Remove the transport support from
the door sides.
3. Remove the transport support from
the lower hinge (some models).
CAUTION!
Some models are fitted with a
silencing pad under the
cabinet. Do not remove this
pad.
50 mm
8.6 Levelling
When placing the appliance ensure that it
stands level. If necessary adjust the feet
using the adjustment spanner supplied.
Door alignment is dependent on proper
levelling.
8.7 Door reversibility
3
WARNING!
Before carrying out any
operations, remove the plug
from the power socket.
ENGLISH
15
2