Advanced micro peripherals DVICOMP-IS 하드웨어 참조 매뉴얼 - 페이지 14
{카테고리_이름} Advanced micro peripherals DVICOMP-IS에 대한 하드웨어 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Advanced micro peripherals DVICOMP-IS 17 페이지. Dvi to composite scan converter board
페이지 인쇄2: Installation
2
23
TX0-
25
TX0/5 Shield
27
TX5+
29
TXC+
Note: This connector is compatible with the TMDS output of the VAC2000 board.
PWR – Auxiliary power input (may also be used to supply power to the stack)
Pin
Signal
1
Not connected
2
GND
3
GND
4
+5v
-Plus
PCI1 - PC/104
Standard 32-bit PCI-104 bus PCI Rev 2.1 compliant, 3.3V operation.
The standard PCI bus signals are only connected to the mini PCI socket. Since
mini PCI is defined as 3.3v only (not 5v compliant), the DVICOMP-IS may only
serve as a 3.3v Add-in card when fitted with a module.
MINI1- mini PCI Type III 32-bit PCI (3.3V operation)
Standard 3.3v mini PCI bus expansion connector.
LEVEL1 – links 1-2 and 3-4
Used for IDSEL card selection.
The setting of the first two links on the LEVEL header determine the logical stack
position of the DVICOMP-IS on the PCI-104 stack. This setting routes the
appropriate IDSEL, PCICLK, REQ and GNT signals to the mini PCI card hosted on
the DVICOMP-IS card.
© 2018 Advanced Micro Peripherals
Document version A.01
24
26
28
30
bus.
DVICOMP-IS Hardware Reference Manual
TX0+
TX5-
TXC Shield
TXC-
14