andover Model-One 제품 설명서 - 페이지 6
{카테고리_이름} andover Model-One에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. andover Model-One 8 페이지. Modular stand system
andover Model-One에 대해서도 마찬가지입니다: 제품 설명서 (19 페이지), 제품 설명서 (14 페이지)
페이지 인쇄
Two-Shelf Assembly
Follow these instructions for standard Two-Shelf assembly. Refer to your
Subwoofer manual to attach the Upper-Stand to the Model-One Subwoofer.
Begin by placing the Upper-Stand with its top down on a soft surface that will
not scratch the top of the stand.
1. Screw the four threaded cam-lock
posts (Item 1) fully into four white
threaded holes in the bottom corners
of the Upper-Stand. If you are
attaching the Upper-Stand to a Lower-
Stand, use the holes nearest the edge
of the stand. If you will be attaching
the Upper-Stand to a Model-One
Subwoofer, use the four inner holes.
2. Press the wooden Locating Dowels
(Item 2) into the slightly larger holes
adjacent to the holes you used for the
cam lock pins.
3. Place the Lower-Stand with it's top
down over the pins and dowels you
installed in the previous step.
4. Insert a Cam-Lock cam (Item 3)
fastener from the inside into each of
the Cam-Lock holes and turn each one
clockwise to lock the units securely
together.
5. Screw the four adjustable feet (Item
4) into the four threaded inserts near
the corners of the Lower-Stand. You
will be able to screw these in and out
individually to level the stand.
6. Flip the assembly over and place it in
position. Adjust the feet as necessary
to keep the stand level and stable.
Use inside row to attach to Subwoofer
Use outside row to
attach to Lower Stand
Page 6
1
2
4
3