Andreani Group Cartridge Kit 설치 지침 - 페이지 4

{카테고리_이름} Andreani Group Cartridge Kit에 대한 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Andreani Group Cartridge Kit 4 페이지.

Make the oil level with tool cod. 1115 respecting the air-chamber

values given in the last page of this manual (Pic 13).

Insert spring and spacer into the fork (Pic 14).

pic 13

cod. 1219

pic 15

Mount the Cap, with the shaft completely down into the cartridge

and making a Phase* of 4 turns (Pic 15). Close the upper cap of

the fork.(Pic 16)

Compression 2 turns (from fully closed to open)

Rebound

Spring preload 4 turns (from fully open to close)

*Phase: With the cap still not inserted into the fork, open completely the

hydraulic adjuster and then turn it 4 times clockwise. This way when you insert

the cap into the cartridge it'll stop in the right position. Tighten it onto the car-

tridge and continue the procedure of installation

cod. 1115

Base Setup

2 turns (from fully closed to open)

pic 14

pic 16