Electrolux DXK5500 사용자 설명서 - 페이지 32

{카테고리_이름} Electrolux DXK5500에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux DXK5500 36 페이지.

Maintenance

Before performing any maintenance

operation, disconnect the hood from

the electricity.

This serves to hold the grease particles in suspen-

sion. The metal filter should be washed every

month with warm soapy water or, if possible, in

the dishwasher (60°C).

Remove the filter:

● Move tabs E inwards (Fig. 2).

● Pull the grid slightly outwards and turn it

downwards.

● To remove the grid, slide it out from the right-

hand side until the grid is unhooked (Fig. 3).

● To remove filter M, open the grid, open tabs L

and pull out the filter (Fig. 13).

● Leave to dry before refitting it. Be sure that the

grease filter, once blocked with tabs L (Fig. 13)

cover completely the holes of the grid.

Whenever the grease filter is cleaned, the relative

grid should also be cleaned with non-abrasive

detergents.

This filter dissolves cooking odours.

It should be changed every 6-8 months in normal

use.

The carbon filter must never be washed.

To remove the filter, turn it anti-clockwise until it

becomes unhooked and free.

Attention

Failure to observe the rules for cleaning the appli-

ance and changing and cleaning the filters may

cause fires. Therefore, we recommend observing

these instructions.

To clean the outside of the hood use a cloth mois-

tened with denatured alcohol or neutral liquid

detergents. Never use products containing

abrasives.

Fig. 13

● Disconnect the hood from the electricity.

● Open the suction grid

● Replace the damaged part with one of equal

rating. (Max 40 W E 14.).