Electrolux E48WV12EPS 설치 지침 매뉴얼 - 페이지 5

{카테고리_이름} Electrolux E48WV12EPS에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux E48WV12EPS 18 페이지. Wiring diagram
Electrolux E48WV12EPS에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (14 페이지), 배선 다이어그램 (1 페이지), 설치 지침 매뉴얼 (18 페이지)

페이지 인쇄

SAFETY PRECAUTIONS

WARNING

• Read all instructions before using this appliance.

• Install or locate this appliance only in accordance with these installation

instructions.

• Do not operate this appliance if it has a damaged electrical conduit or wires, if it

is not working properly or if it has been damaged or dropped.

• To reduce the risk of fire, electric shock, or injury to persons, observe the

following:

a) Installation work and electrical wiring must be done by qualified person(s) in

accordance with all applicable codes and standards, including fire-rated

construction.

b) Sufficient air is needed for proper combustion and exhausting of gases

through the flue (chimney) of fuel burning equipment to prevent back

drafting. Follow the heating equipment manufacturer's guidelines and safety

standards such as those published by the National Fire Protection

Association (NFPA), and the American Society for Heating, Refrigeration and

Air Conditioning Engineers (ASHRAE), and the local code authorities.

c) When cutting or drilling into wall or ceiling, do not damage electrical wiring

and other hidden utilities.

d) Ducted fans must always be vented outdoors.

e) Use this unit only in the manner intended by the manufacturer. If you have

questions, contact the manufacturer.

f) Before servicing or cleaning unit, switch power off at service panel and lock

the service disconnecting means to prevent power from being switched on

accidentally. When the service disconnecting means cannot be locked,

securely fasten a prominent warning device, such as a tag, to the service

panel.

• To reduce the risk of fire, use only metal ductwork.

• Grounding Instructions

This appliance must be grounded. In the event of an electrical short circuit,

grounding reduces the risk of electric shock by providing an escape wire for the

electric current. This appliance is equipped with a cord having a grounding wire

with a grounding plug. The plug must be plugged into an outlet this is properly

installed and grounded.

• Improper grounding can result in a risk of electric shock.

• Consult a qualified electrician if the grounding instructions are not completely

understood, or if doubt exists as to whether the appliance is properly grounded.

Safety