AirTech ATS-400B 사용자 설명서 - 페이지 3

{카테고리_이름} AirTech ATS-400B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AirTech ATS-400B 7 페이지. Land mobile radio (lmr) fm handheld transceiver

Unpacking

Unpack and check that all items have been enclosed.

Packing contents:

radio

antenna

(1,700 mAH)

belt clip

hand strap

manual

Optional

Accessories External speaker/microphone

1. Additional battery pack

Installation and Removal, Belt Clip

battery pack

charger

user's

Installation: Align the belt clip with the plastic slots of

the battery pack. Slide the belt clip onto the battery pack,

pushing firmly until a click heard.

Removal: Hold up the belt clip release tab with a

fingernail or a coin (or like instrument). While holding up

the release tab, slide the belt clip out and away from the

battery pack.

Installation and Removal, Battery Pack

Installation: Turn off the transceiver. Hold the

transceiver with the back of the unit

facing up. Place the battery pack against

the back of the transceiver so that the

tabs on the transceiver engage the four

openings in the battery pack. Slide the

battery pack toward the top of the

transceiver until a click heard.

Removal: Turn off the transceiver. Hold the radio with

the back of the unit facing up. With the thumbnail of your

other hand slide the latch lever down. While holding the

latch lever down, slide the battery pack down toward the

bottom of the transceiver. Separate the battery pack from

the transceiver.

Installation Antenna

Rotate the antenna clockwise until it is seated firmly.

*. Before starting operation, make sure the battery is fully

charged.