Atlantic Ultraviolet Sanidyne 40-0674C 설치 운영 및 유지보수 - 페이지 7

{카테고리_이름} Atlantic Ultraviolet Sanidyne 40-0674C에 대한 설치 운영 및 유지보수을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlantic Ultraviolet Sanidyne 40-0674C 20 페이지.

페이지 인쇄
Atlantic Ultraviolet Sanidyne 40-0674C 설치 운영 및 유지보수
K
C
eyPaD
ontroller
Treatment Time
1
Displays HOURS: MINUTES
Hours Button
2
Up and Down Arrows set
time from 0 to 24 Hours
1. Treatment Time: Displays chosen treatment time which will countdown after start is selected. Flashes with word "PrEP"
during Countdown Time, the word "run" during Treatment Time and "donE" when Treatment Time is completed.
2.
Hour Buttons: Up and down buttons are used to select treatment hours between 0 and 24.
3. Minute Buttons: Up and down buttons are used to select treatment minutes between 0 and 59.
4. Start / Stop Button: Begins treatment time countdown, also used to restart Sanidyne
Operating Area.
5.
Power Indicator: Glows RED when power is applied to Sanidyne
if occupancy sensor is tripped.
o

verview

Figure 2 – Keypad Controller Overview
TREATMENT TIME
HOURS
Minutes Button
3
Up and Down Arrows set
time from 0 to 59 Minutes
MINUTES
POWER
START
STOP
and will flash during Treatment Time. Flashes rapidly
®
Power Indicator
5
Glows RED when power
is applied, flashes during
Treatment Time
Start /Stop Button
4
Used to begin Treatment Time
and Restart unit after Alarm
after an intruder is sensed in
®
7