Electrolux EL4021A 서비스 매뉴얼 - 페이지 13

{카테고리_이름} Electrolux EL4021A에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux EL4021A 17 페이지.
Electrolux EL4021A에 대해서도 마찬가지입니다: 소유자 매뉴얼 (20 페이지)

3 Electronic Control

1. Main plug connected:

- Motor shall be off.

2. First start (after main plug is connected):

- Motor power starts in Max power position (remote version).

3. Power setting is changed by regulation button:

- Motor power steps up or down.

4. Cleaner is turned off by On/Off switch:

- Motor turns off; last power setting is remembered by the microcontroller (remote version).

5. Cleaner is turned on by On/Off switch after being at point 4:

- Motor turns on, and starts at the last used power setting (remote version).

3.2 RF transmitter

Introduction

The RF transmitter is used as remote control for a vacuum cleaner powered by a 3V changeable

lithium cell. The transmitter uses the 2.4 GHz (carry over from Ceres/Castor)

inside EU. With the transmitter it is possible to turn the appliance on and off, and regulate the motor power.

Estimated lifetime for the battery in normal use is approximately 8-12 months.

Learning

If the PCB has not saved transmitter address – New PCB from supplier

1. Plug in the cord to the main. The motor will fluctuate.

2. Push the buttons in the given combination at the same time (to do this you have 20s after connection

to main )

/ 1+3+4 /

3. If the teaching was successful the cleaner will turn on (1.5s) and after that turns off.

4. The cleaner is ready to use.

Publication number

band for transmitting data

Rev. 01

09/2015

PR - 13/17